Indoor Planter with LED Grow Light

🎯 Recommended Print Settings

For best results, print this design with a standard 0.4 mm nozzle and a 0.24 mm layer height—this is the sweet spot balancing speed and detail. Infill of 8% would work well, keeping it lightweight yet stable enough for everyday use.

LED KIT

🧾 Printing Options:

✅ Option 1: Fully Automatic (with AMS / Multi-Color Print)

• Just use the "Fill" option when applying colors in Bambu Studio — it will automatically fill the outer liner of the model.
• This method requires no assembly — just one click and done.
• However, it will take around 22 hours to print.
  (Yeah... this is when I really wish I had a H2D 😅)

✅ Option 2: Print Separately & Assemble (Faster Method)

• I’ve included the outer liner , so you can print it and the planter individually.
• Total print time: under 6.5 hours!

🛠️ Assembly Instructions for Option 2:

1. Align the Liner:
   • Start by lining up the top and bottom ends of the outer liner with the main body.
   • Refer to the reference image below for positioning.
2. Shape & Hold:
   • Gently shape the liner to match the curve of the planter.
   • Use masking tape to temporarily hold it in place.
     • (I prefer masking tape because it doesn’t leave marks, but any tape will work.)
3. Apply Gentle Heat (Optional but Helpful):
   • Use a heat gun or hair dryer to apply gentle heat across the curved liner.
   • After removing the tape, the liner will hold its shape better — making it easier to glue.
4. Glue the Liner:
   • Apply super glue along the edge of the liner and press it into place.
5. Insert the Cable:
   • Thread your USB cable through the rectangular hole in the body.
   • The body with the control button, press the button down gently while pushing it through — that helps it slide in easier.

My Other Designs

Check out my other designs

Let me know if you have any questions or difficulties. Happy Printing !!!