变形小船 Transformation Benchy

2025.11.30

• Filament pinning

• Add installation step diagrams,Component linking only requires cutting printing filaments
  • 增加安装步骤图,部件连接需要裁剪几段打印耗材就可以了
  • Add installation step diagrams,Component linking only requires cutting printing filaments

• 我的是petg打印的,减速打印可以减轻热量堆积问题
  • I used PETG printers; slowing down the printing speed can reduce heat buildup.

---------------------------------------------------------------------------------------

一开始是想要折纸形式,折起来是小船,太难,然后想散开如花,有人做了,然后结合两者做的,本来希望嘴巴能张嘴后,嘴巴里有个炮,空间有限,不做了.变成机器人也想过,太紧凑不好做.

• 大炮转轴有点晃动.转动时候要按压着,毕竟转轴和炮不是一体的,胶水粘下会好些
• 需要一些料材链接
• 支撑设置可以参考我的打印配置

At first, I wanted to make it in the form of origami. It was too difficult to fold it up like a boat. Then I wanted it to spread out like a flower. Someone had done that. Then I combined the two. I originally wanted to open the mouth and have a cannon in the mouth, but the space was limited, so I didn't do it. I also thought about turning it into a robot, but it was too compact and difficult to make.

The cannon shaft shakes a little. You have to press it when turning it. After all, the shaft and the cannon are not integrated. It will be better to glue it down

I need some material links

For support settings, please refer to my printing configuration