Hiking Container - Robust and Waterproof

Hiking Container

 

Robust, small outdoor container for your hiking, camping, fishing or other adventure trips.

 

Size

~ 90 mm x 67 mm x 36 mm

 

Features

• robust design
• waterproof (if you use the foam rubber sealing) (TPU seal might follow)
• robust hinge
• hole for paracord attachment
• pocket size

Print

Print Time: ~ 2.5 hours

Filament Use: ~ 70 g (1.3 g Support material)

 

PLEASE PRINT WITH SUPPORT! The latch mechanism is tuned to a few tenth of a mm. Even if the overhang gets printed without the support it will never be accurate enough. The right support settings are in the printprofile.

I would recommend to use the support type "standart" and style “snug”

 

I would recommend to clean the print plate with isopropanol and put some glue on it. 

 

Assembly

A little bit of support is needed to make sure that this design is printable. Please make sure that you clean it before assembly.

 

What else to i need?

M4 x 20 mm Cylinderhead Screw

Optional: Foam rubber sealing

Membership

 

Waterproofness

I left it outside in the rain for a few ours. Even without the seal there was no water in it. But if you need it to be waterproof when dipping it shortly under water you need to put in the foam rubber sealing.

 

Boost Me

 

Check out my other models.