10inch fake vinyl AWFUL MUSIC by David shrigley

WHEN PRINTING VINYL (Not including printing artwork by itself) ON Xseries PRINTERS REMOVE CALIBRATION LINE IMMEDIATELY AFTER PRINTED TO AVOID THE PRINT AND THE CALIBRATION LINES MERGING

really loved this David Shrigley casetify phone case

 found online and i tried recreating the vinyl into a real scaled 10inch standard vinyl for decor/ display. There are two print profiles to choose from one is a single piece (i recommend separated version because the inner artwork can be printed flush on the print bed to be displayed on the top side of the vinyl which have vinyl tracks [double sided and single sided available double sided colors might show through if your not using matte filaments for white] ) the other is the vinyl and the artwork separated. 

If you are printing this without my print profile please set the vinyl top and bottom surface pattern to Archimedean chord to mimic the vinyl tracks and add a negative cylinder part of 7.24mm to the center of the artwork since adding the hole in make my sign was barely possible since you can't type in numbers for the hole diameter.

vinyl diameter

250mm

artwork diameter

100mm

Hole diameter

7.24mm 0.285in