LED Frame for Bambu Lab AMS

I decided to highlight my beloved AMS and I decided to create a frame with LEDs to honor it.

I printed all the pieces in PLA and added a backlit label to the front.

For those who have already printed and are using the AMS drawer organizer, know that the frame is compatible with it by making small changes which you will find explained in the attached PDF file

If you want to make the writing even brighter, use a transparent material for it, opaque white is fine and allows light to pass through.

For the lighting I used a 5V RGB LED strip and to adapt it to the frame I had to cut it into five pieces which I then connected with tin-soldered wires. I also thought about adding a cover to the LEDs to limit the intensity of the light and avoid any interference with the AMS optical sensors.
You decide whether to apply it or not, I advise you to do so.
To connect the four sectors of the frame I used butterfly keys, in the files at your disposal you will find two different sizes, I recommend you print the "KEY+0.10.stl" version which is 0.10mm wider and ensures a connection more rigid.

As always, I hope you appreciate my work and I apologize for any grammatical errors, unfortunately I rely on Google Translate for the translation.