Sorcerer Mickey

Standing at just under 4 inches tall. Sorcerer's Apprentice Mickey Mouse from Fantasia (and Fantasmic!), ready to defend the Kingdom and no longer just an apprentice. 

The model is split into two plates (Mickey and the base)for easier printing and assembly. 

Printed with a .2mm nozzle  

• .08 layer height.
•  Print with tree support (or any you feel will do better)
• Top and Bottom Z Distance: .24 mm
•  Support/object xy distance: .5
• 15% infill
• 4 walls.
• Outer Wall: 20mm/s
• Inner Wall: 35mm/s 
• Sparse and Internal infill: 35mm/s
• Top Surface: 25mm/s

* I RECOMMEND YOU PRINT SLOW!! – I found anything faster than Outerwall 20mm/s and Inner Wall 35mm/s would result in issues (but I also think my printer might also be having issues, so if you are more experienced, you might be able to get around this)

** You can switch the profile for the base to use the standard .08mm as that isn't nearly as intricate. Should shave off a few hours on the whole print – I tried to include it in the upload, but for some reason it didn't take, keeps defaulting to the profile I have set for Mickey.