brick base plate "straight road"

Simple base in the shape of a straight road for the classic bricks.
The dimensions are 231x231mm, optimized for the Bambu Lab plate.
Have fun creating lots of streets for your cities, and rush to download the other street models.

TIPS FOR PRESSING
being a print that takes up the entire plate:
- clean and degrease it well before printing.
- Turn off the side auxiliary fan
- PEI Texture plate recommended
- First layer ALL at 50mm speed (not just the perimeters at 50 and the filling at 100, but the entire first layer at 50 speed)
- Increase the width of the first layer to 0.55 to increase adhesion to the plate
- the tolerances are very tight, and as you can see the bricks stick well in my print, but just 0.1mm of difference more or less and the bricks could be too loose or not fit together (it is normal to have small differences between the various printers and among the various brands of filaments).
If this happens, you have to use the K flux, or the rim tolerances, to obtain the desired mounting resistance.