Printednest Bird Feeder 4.5

All about this projects: Birdfeeder 4.0 and Birdfeeder 4.5

Video assembly instructions:

!!! Information for the fine print:  This model does not need supports. Use our 3mf file. We put a large brim for better adhesion of the print. If you are using stl file, add at least a 40mm brim in your print setup. At the same time, it does not speed up printing to a higher speed than is set.  make sure the PEI sheet is properly cleaned and for better adhesion use a spray or whatever you are using !!!

Update 28/1 - This model should not be a problem to print without support. Anyway, since we see that some of you have a problem printing this model, we are adding ready-made 3mf profiles with added supports. They are tree-like and set on critical spots.

More info about on our Youtube Channel
facebook: https://www.facebook.com/printednest

Printednest Makers | 3d Print Group: https://www.facebook.com/groups/printednest

twitter: https://twitter.com/printednest

instagram: https://www.instagram.com/printednest/