Battery Container

Battery Container

 

Robust, lockable container for Batteries, SD Cards and other stuff. Ideal for Camping, Photography and other outdoor adventures. There is quite some choice for the inlays, but you can custommize your own inlay. For your specific camera batteries, tools, camping equipment, etc. Just download the STEP file and start customizing

 

You can find the STEP Files for customizing under "download STL" .
 

 

Size

 ~ 120 mm x 70 mm x  68.5 mm

 

Features

• Robust design (the bumper on top could be from TPU to give extra impact absorbtion)
• waterproof (if you use the foam rubber sealing)
• robust hinge (2x M4 screw)
• Customizable Logo plate (Put your logo or Name in Bambu Studio)(Use the STEP for even more customization)
• 5 inlay options for Batteries, SD Cards, etc.
• Option to customize your own inlay (use STEP file)

Print

Print time: Since there are so many options to choose from it depends on what you print

FIlament use: Same here

 

It is a tiny bit of support needed to make this design printable, i would recommend to use the Support “Standart” and Type "Snug".

 

Assembly

A little bit of support is needed to make sure that this design is printable. Please make sure that you clean it before assembly.

 

What else do you need?

2x Cylinder Head Screw M4 x 12 mm 

6x Cylinder Head Screw M3 x 8 mm

Optional: 2 mm Foam rubber sealing

 

Waterproofness

I left it outside in the rain for a few ours. Even without the seal there was no water in it. But if you need it to be waterproof when dipping it shortly under water you need to put in the foam rubber sealing.

MembershipBoost Me

Check out my other models.