DoubleDucker Double Reed Duck Call (100% 3D Print)

Boost MeConsider leaving a boost if you enjoy this model :D

Check out my Newest Single Reed Duck Call, the Two Tone: https://makerworld.com/en/models/1555538-the-twotone-duck-call-100-3d-printed#profileId-1634322 


PLEASE READ DESCRIPTION!!!

I have gotten many requests for a double reed call, so here is the “Double Ducker” Mallard Call! Main body can be printed at .2mm using PLA or PETG with 15% infill. I recommend printing the reeds at .1mm because they are so thin. This call utilizes some ribbing to increase grip and handling on them cold and rough days, and features a double reed design to add that little bit extra realism to the sound.

IMPORTANT:
This model contains a slimmer wedge than my other models to accommodate for the addition of the extra reed. You can replace the larger reed with any of my other reed designs, and do some tinkering to find your favorite combination! The smaller reed has a small raised section to give it some space between the larger reed. Make sure this raised section is in the middle of the two reeds.

There are assembly instructions attached below!!!