SSD enclosure/case (T5, T7, T9, Others)

An aesthetic enclosure for Samsung T5, T7, T7 Shield, T9 SSDs, inspired by old Mac Pro designs. 

The case ensures high air ventilation and features a durable sliding lid. 

This setup is perfect for RAID configurations, keeping SSDs together securely. 

You can also use arcs for better cable management.

 

Boost MeYour support means a lot to me!

 

If your SSD is not listed, use the "Customize" button to create a case based on the exact dimensions of your SSD.

 

Printing rules:

1. Separate the case and cover into individual objects:

   
    

2. Enable supports for the long upper arches:

   
    

3. Place the parts before printing as shown below:

   
    

4. Suggestion: move the seam to the bottom side to ensure a clean appearance:

   
    

5. Use gyroid infill pattern

 

 

For the “Universal For 3 SSDs of different sizes”:

• H-shaped objects will also be generated, which you must insert after the disks to compensate for their different lengths
• If they are too thin and the slicer gives an error, do not print them

 

I recommend checking the actual sizes of the SSD slots after generating the file!