Ikea Skadis Ultimate Headphone Holder

Boost MeI really appreciate it — if you like what I've produced, let me know by boosting and I'll keep at it!

 

New version coming soon will include:

• Taller mount to give more vertical room between upper mount and shelf, should make it easier to grab things.

New attachments coming soon:

• Narrower shelf
• Flat display shelf (no sides etc)
• Your suggestion…

Ultimate IKEA Skadis Headphone Holder with Integrated Shelf

Upgrade your IKEA Skadis pegboard setup with this sleek headphone holder, purpose-built for function and style. Designed to accommodate headbands up to 60mm wide, it keeps your headphones safe, secure, accessible, and off your desk.

This model also features an integrated mini shelf – perfect for organising stray cables, adapters, or other small essentials that typically clutter your workspace. It also looks damn good, with headphones on, if I say so myself.

Key Features:

• Compatible with IKEA Skadis pegboards
• Supports wide headphone bands (up to 60mm)
• Built-in shelf for cable management or accessories
• Minimalist design to complement any setup
• This mount has been strength-tested with a 1 kg load when printed in the recommended orientation using PLA @ 15% cubic infill. The shelf will likely only take couple hundred grams static load akin to a typically printed Skadis shelf.

 

Assembly & Removal of Supports:

 

Supports
Each Skadis hook will have supports for obvious reasons. By now I would hope you have access to some needle-nose pliers so that you can accurately take them apart. It's a snug fit so sometimes, depending on your printer and filament used, you may get some of the interface layers of the support left over. Again, nothing needle nose pliers can't fix, take off what you can, and scrape the rest of.

 

Assembly

Assembly is super simple. Just put the rear tab of the shelf through the headphone mount's rear cut-out at an angle and slowly rotate the shelf until it nicely clicks into place.

 

 

Important Print Notes:

Don't change the orientation or supports unless you know what you're doing – For maximum strength, it is essential to print this model in the orientation provided in the downloaded print profile. Changing the orientation—especially printing it upright—can significantly reduce structural integrity due to filament layer direction, which is a limitation of filament-based 3D printing, not the design itself.

Not yet tested in PETG – while PETG may improve durability and flexibility, I may need to make slight tolerance adjustments to the model to account for PETG’s shrinkage characteristics.