Bird Feeder with Flip Open Lid

A nice little garden bird feeder shaped like a hut with wood grain texture!

The model features a hinged roof for easy refilling, a couple perches for the birds, and drainage holes in the lower tray.

The only thing required for assembly is some super glue. Assembly is very easy:

NOTE: When making connections, put a small amount of super glue into the channels before pressing them together to help hold everything after assembly.

1. Start with the tray, and press the main hut into the grooves along the side, near the center of the tray
2. Add the roof truss on top of the main hut
3. Add the roof
4. Press in the two dowels to the slots in the tray
5. Put a string through the small cylinder, and feed the string through the hole in the roof, with the cylinder on the inside. Attach to whatever you want!

Since this is an outdoor model, I would recommend printing in ASA or ABS for longevity. PLA will still work, but probably won't last too long in the elements.