Bolt-Action Bit Driver - 1/4" Bit Drum Magazin

The Bolt-Action Bit Driver is the coolest hand tool you will have in your arsenal !
It borrows two different firearm mechanics which makes it fun to use.

• Load and retract the bit with the Bolt Action Mechanism
• Store 6 bits in the magnetized drum magazine
• Spring loaded indexing mechanics for the drum
• Double locking mechanism to secure the drum in closed position
• Thrust bearing made of six 8 mm Steel balls for the hand rest

With the Maker's Beginner Kit ZC002 you get all necessary Hardware parts!

 

The Design was inspired by the “REVOLVE” from StraightLine EDC

Information: This tool is meant for low torque applications

 

Why did I use the Maker's Beginner Kit?

I had bought a kit out of curiosity. When i opened my Kit and found the 8mm Steel Balls i thought those would make a nice bearing.
Also the provided magnets are conveniently smaller than the footprint of a ¼" bit for screwdrivers.

At that point i challenged myself to create the whole design from the parts provided in that kit.

 

The big advantage of the Kit is that in the Points Reward shop you can use 130 points to create a 99% discount code for it.

Also you can always disassemble this model and build one of the other amazing models available for this Kit!

 

Parts used from the kit:

• 16x   M3x8  Screws
• 6x     8 mm Steel Balls
• 9x     4x2 mm Magnets
• 5x     0,5x5x20 mm Springs
• 1x     2x18 mm Pin from the Gear kit

Assembly:

The PDF Instruction guides you with pictures and descriptions through the printing, preparing and assembly process.

 

Boost MeEnjoyed this Model? A boost helps me create these time consuming projects.