Drainage mesh for self-watering pot

Drainage mesh for closed pot without holes at bottom. Simply put this mesh at the bottom of pot, add layer of stones and pot your plant with soil as usual. Thanks to spacers plant will have tank of water to drink from and you will not need to afraid of plant rotting.

Included model is for quite big 30cm pot so feel free to resize for your needs. It consists of 4 pieces which you need to glue together with CA glue. There are a few notches to help you guide gluing process. 

There is also version included for inserting plastic pipe (I used 14mm water-cooling PMMA (acrylic) hard tube) which can by used as indicator for water level at the bottom. There is buoi incldued and top label as pipe cover. You can connect these together with wooden stick and use as water level indication. Buoi requires a bit of testing, to make it truly waterproof, else it will not operate properly :) lacquering surface usualy helps, but feel free to experiment :)

Hope this helps someone and good luck with your plants!