Tripple Flashlight Mount

Boost MeI enjoy sharing designs with the community :)  Please like/rate/boost 

I really like the deals at Costco and see these flashlights all the time when I walk through.  But who wants three flashlights rolling around in a drawer or lost somewhere in the house or camper.  I designed this mount to keep them in a known place, organized, and accessible.  It is printed in parts in order to maintain best layer alignment for strength and durability.  

 

Print all parts flat on the bed, no supports needed, I used PETG for durability.

 

I've hung it with four 3m command strips for now, will see if that holds up at home before I mount in my camper.  If that is not strong enough, I've included three screw holes as well.  The screw holes are hidden when assembled, so hang the backer, slot the clips into the dovetails, then slide the dovetail covers on after the clips.  

 

It can also be used to hang flashlights under a cabinet or ledge, just use the smooth part of the flashlight in the middle so they ballance out rather than hanging from the one on the end.

 

This is sized for the flashlights shown, available at Costco or at Amazon (https://www.amazon.com/DURACELL-Durabeam-Flashlights-Rechargeable-Batteries/dp/B0DCDZS6X6/ref=sr_1_1?crid=32ZYLOVHF024V&dib=eyJ2IjoiMSJ9.5lpER2rOmSh0imt5Cto0hM0pKLV0w8BBXggs0DAOxpDsWOj0mn_bdntL9rqpwQapIs1VCuu5NV-yVRHm6y1drLlD4LIasE4CgVvVB3IgUPzBMCY21RuTc01IzkKacjPQyumBco_FS6YTmT8od7syf77a86AS7Uclz3ITMLVwWPorWFP_xs4NXRVZk0tY6gw5bX6uWVi-M5EhVZqtMDKEOKLgGzVhF1Figk-2qPQ0ssHcRmOhDs_jHlXQ8V1oba-RyNKM1c7lOIGzKJuCC_YNpDJWK_2d9EfC0vr4fyTkWac.CoEGAM_o82jrM6UwiT-Lwgw-a4BAbMVreQI6jFybYuY&dib_tag=se&keywords=duracell+flashlights+3+pack+1200+lumens&qid=1746576530&sprefix=duracell+flashlight+3+pack%2Caps%2C159&sr=8-1)

 

enjoy :)