Unicorn Voronoi

Update (December 30, 2025)

Due to problems with removing supports on some prints, the print profiles have been updated. There are two print profiles with a layer width of 0.2mm and 0.12mm. 

1. The first print profile has a model size of 29x109x100mm (X, Y, Z) and includes tree supports. The layer height is 0.12mm.
2. The second print profile has a model size of 29x109x100mm (X, Y, Z) and includes tree supports. The layer height is 0.2mm.

And as always be very careful when removing the supports, especially for smaller models. This is a very delicate print, take your time removing the supports, it's worth it. 

I also recommend using pliers or tweezers if the supports are too tight. However, it depends on the type of filament used.

You can also see new version of Unicorn Voronoi with stronger pattern:

https://makerworld.com/en/models/951059#profileId-919000