PartyCup dispenser and sharpie holder

Forget about those awkward moments when you leave your drink to go to the toilet and when you come back you find a table full of the same colour cups without knowing which one was yours.

Either to protect yourself from covid or to take care of the environment by using only the necessary, don't let this happen to any of your guests again.

This dispenser keeps your cups stacked wherever you need them while offering a convenient and easy way to keep a sharpie handy so everyone can label it with their name.

Is designed to fit cups from 2.5 to 4inches in diameter. and tested with fine point sharpies and the normal point ones.

You can choose between two versions:

• smooth = that looks great on any filament color

or

• wood = with engraved details that simulate wood and looks perfect on brown or wood filament

PRINTING SETTINGS

Material: PLA / PETG

Layer height: 0,2 - 0,28 mm

Nozzle diameter: 0,4mm or 0,6mm

Infill: 10-12%

Perimeters: 2

Support: NO

I added a “flag” that you can attach to the sharpie, so everyone know exactly what to do. you just need to print it in the same orientation that the original file (same as shown in photos) with no supports and paint the letters with the same sharpie.

You can paint it with different colors, but I think is to slow and much filament for what it is.

PAINTING TIP FOR THE FLAG

some filaments or layer heights are not very suitable for “drawing on it” so once is printed you can give it a thin layer of transparet nail polish or spray paint and then paint the letters with the same sharpie you will use for a better result.

You can check all my models here

dgoalva | Printables.com