This is an extended length M-LOK handguard for the Daisy Red Ryder air rifle.
Features:
- M-LOK slots along the sides and bottom for mounting accessories.
- A full 13 inches of length, giving you a much larger grip area and more room to customize.
Designed to install with no permanent modifications to your rifle.
I printed my own prototypes in PLA+ and they have held up very well.
Glue is not required, but can be used to permanently attach the two handguard halves together.
Installation Instructions
⚠️ Safety First ⚠️
Before starting any modification:
- Make sure the airgun is unloaded
- Engage the safety
Tools Needed:
- Phillips screwdriver
- Super glue or epoxy (optional)
Step 1: Assemble the Handguard
- Connect the two halves of the handguard using the four included connector pieces.
Each half has four slots near the end—apply a drop of glue into each slot on both halves. - Insert the connectors into one side, then carefully align and slide the second half into place.
Allow the glue to fully cure before moving to the next step.
Step 2: Remove the Original Handguard
- If your handguard has a metal collar, slide it forward toward the muzzle and off the barrel.
- Next, remove the Phillips screw from the bottom of the stock handguard.
The original handguard should slide off easily with no resistance.
Step 3: Install the New Handguard
- Position the new handguard on the rifle—it should snap into place and feel snug.
- Slide it rearward toward the trigger to ensure a tight fit.
- Reinsert the Phillips screw through the bottom of the handguard to secure it.
The handguard should also fit an Umarex Marlin BB rifle, I do not have one to test fitment.
Complete the kit with my Air Stripper Muzzle Brake and Picatinny Top Rail.
Follow me for more Daisy airgun mods — I have some exciting designs on the way!
Boost MePlease consider leaving a like and boost if it worked for you!
TheFunk
