Batman Animated / Justice League Unlimited Figure

This a Batman figure modeled after Batman: The Animated Series with styling by Bruce Timm.

Watching Batman: The Animated Series (BTAS) and Justice League Unlimited animated shows, back in the day, I was introduced to Bruce Timm's minimalist, angular outlines and I loved his designs ever since. I thought that with this simplified contours, I don't need to know anatomy and would be able to draw/sculpt his characters. I collected reference materials and studied this particular style in hopes that one day I will be able to draw characters in this style.

Life happened and 30 years after, with the tools available today, I finally had the time and courage to learn digital sculpting. It was a dream come true being able to sculpt and 3D print Bruce Timm's version of Batman.

Throughout the sculpting process, I made sure the overall minimalist styling, angular contours and the face sculpt are accurate to the animated version but reduced some of the exaggerated proportions to improve it further. Hope you like it!

IMPORTANT

Please adhere to the license I set for this model. This model is NOT FOR COMMERCIAL USE. I have not given anyone permission to sell both digital or physical copies of this model.

PRINTING & ASSEMBLY INSTRUCTIONS

1. Select between the available scales:
   1. 1/12 (6in. tall, minus the base) - ideal if you want a bigger model for display and do not have a 0.2mm nozzle
   2. 1/18 (4in. tall, minus the base) - choose this scale if you want a smaller figure that could fit a small desk or display case (requires 0.2mm nozzle).
      
      
2. Print the parts as oriented in the profiles. Supports are required on some areas of the model. The profiles have all the supports set already.
   
   The eyes go in as one piece. They go into the eye sockets from the inside but not all the way through. Use a tweezer to get the eyes in.
   
    
3. Use glue/adhesive to attach the parts.
   
   
    
4. BE CAREFUL removing the supports from the cowl as area especially the mask is thin and could detach along with the supports.

FILAMENTS USED

• cowl, cape, boots: Polymaker Polyterra Charcoal Black
• belt: Savannah Yellow
• body: Matter Hackers Build PLA Silver
• eyes: Inland PLA White
• face: Inland PLA Pastel Pink