Shardback Dragon With Wings - 5h on A1 MINI!

Shardback Dragon With Wings – Fits A1 mini & prints in 5 hours! 

Want me to upload more free designs? Give it a boost then!

See my other articulated designs here

MembershipWant to sell this design or any others I've created? Join the Commercial License tier! 🤩

• Easy and quick to print: Ready to print directly!
• 100% is a total length of 300mm and can be printed on  A1 MINI!
• Scaling up is no problem! 
• To avoid a flat look on the side of the wings facing the build plate, two extra parts are included that can be glued to the wings(optional).

Do not recommend scaling it down, as the design was created at the smallest possible size to fit the A1 Mini from the start.

Let me know if you need any further adjustments!

 

Have fun printing and don't forget to share your prints!!

 

Like the design? 

Show it some love and give it a boost!

Boost MeWant me to upload more free designs?
Give it a boost then! Your support means a lot!

Check out my other designs, including dragons, reptiles, mini's and more here!

Recommended printing settings:

Wall: 3
Layer Height: 0.2 mm
Infill: 5-15% gyroid or similar infill
Support: Not needed
Brim: Use 5mm mouse-ear if needed