My Mom

Oggi ho dedicato quest'opera alla persona piu' importante che possa esistere. Non aggiungo altro!

 

 

https://makerworld.com/it/@acaacacan/upload

 

Project: mom.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mm

Filaments Used:
    ABS BambuLab Black  Transmission Distance: 0.6
    ABS BambuLab Red  Transmission Distance: 4
    ABS BambuLab Blue  Transmission Distance: 4
    ABS BambuLab White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #11 (0.96mm) swap to Blue
    At layer #14 (1.2mm) swap to Jade White for the rest

Boost MeGrazie per il supporto!