Rolex Daytona – Wall Clock

Now you can hang up a wall clock that is inspired by the popular Rolex Daytona!

 

Assembly instructions

The bezel and dial can be joined without screws. Align both parts carefully, then push them firmly together.

 

 

For the second hand, first remove the small black pin (marked in red) from the clock kit’s second hand. Then push the black pin through the printed second hand. Finally, assemble the hands on the clock kit in the order shown in the picture.

 

Please note that this model has been shared for non-commercial, personal use only.

Attention! 

 

To print the bezel flawlessly, you have to remove the purge line directly after calibration or disable it completely. Otherwise it will interfere with the printed object and leave a mark.

 

Please note that this model has been shared for non-commercial, personal use only.

 

Also check out my other wall clocks: 

https://makerworld.com/collections/5716233-wall-clock-collection

 

If you value my work and would like to continue supporting me, you could buy me a coffee. 
Any help is appreciated!

 

Boost MeIf you have extra boosts to spare, I’d truly appreciate your support. Your boost will help me continue sharing unique, niche models for the community to enjoy. Thank you very much!