Hanging bottle holder (storable both directions)

Background: I was frustrated over sauce being stuck in the bottom of the bottle, but not happy with only being able to store the bottle “up and down”. 

 

About the model:  Minimalistic design without compromising rigidity. Primarily for 250ml squeeze bottles, but I decided to make the holes 60mm to hold 33cl “long” cans, etc. aswell.  Hangs on the 6mm rod in my fridge, but should be able to hang on edges too, as long as they arent thicker then 6mm. 

• Enables up and down storage AND normal storage
• Can increase storage in the storage compartment of your refrigerator / fridge door
• Less then 70g of plastic used
• 0 support needed

Instructions:

Very straight forward and easy. Print the 2 parts and glue them together. I used default settings for generic PLA with 0.2mm layer height on my BL A1.

I used white PLA from Sunlu.

 

I have another design which does not require the holder to hang onto something. Check it out on my profile. :)

 

Boost MeBoosting is always appreciated, never expected. It works as a good motivation for me to keep sharing my files as I mostly print stuff for personal needs.

Thanks in advance! :)
Best regards
David