Raven in Roses - Hueforge

This is 4 colour Hueforge of Raven sitting on a skull in roses.

 

I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.

 

Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness.

 

If you want stand for this print check out my Simple vertical stand.

For my Hueforge pictures with border choose the version with 3 mm gap.

 

If you like this picture, you can look at my other animal pictures here in this collection: https://makerworld.com/en/collections/3530022

 

Boost MeI print all of my creations myself.
If you like my work, pls send me a boost, it will help me make more.
Feel free to PM me if you have some idea for a nice picture.
Thank you.

 

Instructions:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Dark Gray Transmission Distance: 2.4
    PLA BambuLab Basic Jade White Transmission Distance: 4.8
    PLA BambuLab Basic Red Transmission Distance: 3
This print uses 4 unique filaments

 

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Dark Gray
    At layer #10 (0.88mm) swap to Jade White
    At layer #19 (1.6mm) swap to Black
    At layer #20 (1.68mm) swap to Red
    At layer #25 (2.08mm) swap to Jade White for the rest.