quick grip clamp

Quick release Bar clamp.

Great for holding glued parts. It relys on a plastic beam that is strong for plastic. But not as strong as a metal bar clamp. So you can apply excessive force with it

other simple printed clamps are excesivly weak. and steps don't allow fine tuning.

Some assy required. 

Fine adjustment for clamp. Depending on the specific head for the large screw will define what knob you want. There are lots of printed knobs available. I happened to have a ¼-20 hex head handy. 

The beam has several sizes in the file. Fits diagonally  on build plate.  The bed sizes there are files are for are 180, 250, and 325. The other sizes are in the cad files. Maker world is not allowing the parts to hang off the build plate. The beam in the main 3mf file is for the x1c.

To add some metal to strengthen there is a penny as the latch. Press the penny in the slot. there is a viewing hole to make sure it is in all the way. 

assembly instructions:

lots of simple steps

1. remove support.

2. insert penny, use view hole to make sure it is fully inserted.

4. free spring in both base parts. Just move from the base

6. place latch on beam with pointed end of the latch pointing to the stop on the beam.

7. Place the 1 base around latch. You probably need to move the spring a little.

8. Insert hex Nut in base. Can work with either M6 or ¼ . Length is not critical anything over 25mm or 1in is fine. Head is up to you.

9. Place the slide in the base.

10. Place the 2nd base around base. You might use some thing to move the spring out of the way to allow it to go together.

11. Use M3 x 25 screws to attach the two bases. Forms threads, so it might be hard to screw in.

12. Use  M3 x 25 screw to attach end stop.

13. glue in a M5 or #10 flat washer as a bearing surface.  it is intentionally undersized.

14. slide the cover on.
    
     

    this is the smaller. There is a longer version. that is almost 2 times the size.
    I also uploaded 3mf files for the 3 different sizes 180, 256, and 320 maxing the bed size.

    https://makerworld.com/en/models/1446455-bar-clamp-with-extention#profileId-1506279