"More Espresso, Less Depresso" desk mug holder

- Coffee mug/drink can holder -

I was tired of always having to be carefull to not spill my office, as I don't have much room on my desk.

Therefore I designed this mug/can holder so I can keep my drinks safe!

This is a fully 3D printed mug/can holder for most desk thicknesses. No Magnets, no bolts, no glue and no screws are needed. Just 3D printed parts. 
 

I designed the holder so it can be printed without any support material. This way there should be no sides with lower quality finish. Resulting in a very nice print.

If you don't have a AMS unit, the main body can be printed in on solid color and the screw an any other.

The holder is designed to hold the most common size coffee mugs, drinking glasses and beverage cans.

(Not tested with slim cans like Red Bull)

• The maximum diameter of a coffee mug is approximately 85 mm
  (The holder has a cutout for mugs with handles.)
   
• The maximum diameter of regular can is approximately 66 mm
   
• The holder fits any tabletop thickness between 15mm and 30 mm

Assembly is pretty straight forward.

The two large parts are joined with a 90 degree twist lock. Please be aware that the twist lock might seem tight if your printer is not well calibrated or if you are using low quality filament with poor tolerances.

Please have a look at the short video showing how to assembly if you are in doubt.

I have made two versions with different qoutes on top:

“More Espresso Less Depresso” and “Drink Responsibly”
If you do not want any text on top, simply re-color the part within Bambu Studio to be one solid color.

My holders are printed with these filaments:

Bambu Lab PLA Matte Ivory

Sunlu PLA+ Black

Bambu Lab PLA Basic Orange

Bambu Lab PLA Basic Bambu Green

Bambu Lab PLA Matte Yellow

Licensing

All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.

For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.

How to Support Me

If you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.

Also please consider donating via https://www.buymeacoffee.com/make3d 
All support is highly appreciated!

Updated 17-01-2024: Added Print Profile V1.1
Increased the span of the opening to allow tapletops down to 10mm thickness.