Fortnight Novelty car tag

PRINT AT YOUR OWN RISK  :P 

I have seen some of these around quite a bit

 

so i decided to change them up a bit wis some quirky and other funny designs 

Recommended glue would be Loctite 401

1.  To glue the edges down ad glue on the base where the design meets the little bar/leg
2. on the section where the little leg comes out fold the desing in half and hold or clamp down 
3. you'll need to add double sided tape on the leg piece and off you go 

 

these colours and background can be changed from Black to any colour you want :) 

Instructions of build for the Car Tags

1. When taking it off the build plate be very careful folding it 

   always best to remove it whilst it still warm “not just as it finished” 
   (but as the build plate lowers itself once it stops, 
   as soon as it stopped lowering "
   remove and with both hands fold)
   so the colour images don't pop out of place 
   and you can easily manipulate it into the right shape 
   this design has been modified for it not to snap  after about 8 attempts 

    

2. I would also recommend to get a silicone based double-sided tape as 

   this wont damage your car
   or leave any residue on the paint 
   
   please let me know how you go with it 

Boost Me