AMS Buffer - Output Guide and Dust Cover

Model

Inspired by dedge design for a buffer output guide, I wanted to design one that double up as a dust cover, so, here it is !

 

This guide completely eliminate the risk of AMS errors, while keeping the Buffer insides away from dust.

Printing

You can use the provided 3MF, no support or specific filament required !

Installation

To install this guide, you can follow these steps :

1. Unscrew and unplug the buffer from the printer.

2. Install the guide like so :

3. Put the buffer back on the printer.

Note : If you ever need to remove the output PTFE tube, you will need to remove the cover first, in order to get access to the release button. To do it, you will need to unscrew the buffer and use the same allen key to push the cover out like so :

Boost MeDon't hesitate to boost my model if you like it !