CYC Stealth Gen 3 Controller Mount

CYC X6 Controller mount. This moves up into the protection of the frame vs underneath the bike. This would also be necessary if you would want to mount the motor within the frame. Mount is set up for 1.4 in frame, message me if you would like a different size.  zip tie mounts located on left and right for cable managment. 

 

Requires: 

• qty 4 M4 x 12 BHCS or SHCS
• qty 2 M6 x 30 SHCS
• qty 2 M6 locknuts
• electrical tape

Press hex nuts into the back of mount. Tape around frame where mount will be located (this will prevent scratches and add grip). Tighten m6 bolts. Install controller with M4 screws. 

 

Boost Meboost me if you felt this made your build more robust.