hueforge艾莲乔tralalalero tralalala绝区零ZenlessZoneZero

Project: 艾莲tralalalero tralalala.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x181.34mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Jade White Transmission Distance: 5
    PLA Chrominal Shadow Gray Transmission Distance: 3
    PLA+ IIID Max Night Gray Transmission Distance: 0.8
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA PolyLite Azure Blue Transmission Distance: 3
This print uses 6 unique filaments

Swap Instructions:
    Start with Jade White
    At layer #9 (0.8mm) swap to Shadow Gray
    At layer #13 (1.12mm) swap to Night Gray
    At layer #15 (1.28mm) swap to Black
    At layer #17 (1.44mm) swap to Red
    At layer #23 (1.92mm) swap to Azure Blue for the rest.