Simply someone requested a version for the H2D so I put this together.
This has 4 Plates:
- Plate 1 - 3 x Hangers for Printer
- Plate 2 - 298 x 298 Grid
- Plate 3 - 258 x 298 Grid
- Plate 4 - 218 x 298 Grid
Things to Note:
- With the use of these since the top lid will be open you will see the Bambu alert message on screen. Since the glass is no longer touching the base with the magnet the alert message will stay. I'm working on a version that may address this but still sourcing a magnet that would work.
- The hangers will only fit on the H2D, where you will see 3 on the plate, whereas 3 would certainly allow for my support pending where you place the grid note the placement of the hangers to ensure there is minimal to no impact from the filament arm. Positioned al the very front I removed the middle hanger since it seemed it would have moments where there could be touching.
- The Grid should be able to work on the X1 & P1 printers though you will have to source hangers that work with the printer, the ones provided here will not work.
- I do not have a design included in this for the hooks for the accessories for the grid, you can find those around maker world. If requested I can work on a version.
Recommendations:
- Printing the hangers in a stronger filament is probably a good idea (PETG, PETG-CF, ASA, ABS, etc..)
Feed Back:
Please feel free to give input, not a lot of testing time on this yet.
Crux
