Cute Minecraft cat articulating head

Cute Minecraft Cat with moving head modeled pixel perfect.

Easy to print and assemble.

For the nose you can either choose pink or red.

You can set the Wall count to 1 if you want, but please be carfully while assembly.

The Cat is assembled from three parts exactly like my Fox

 

To assemble, you must (as you can see in the instructions for my Fox (last picture)):
1. turn the head 90 degrees
2. push it into the body
3. turn the head back the 90 degrees
4. adjust the height to your taste

Be carefull
Have fun

 

I have only tested the tolerances for the head movement on 100% scaling so far. But if the cat is to be printed larger or smaller (so that it matches the scale of my polar bear, which should be about 40% of the size), the tolerances still have to be adjusted, and preferably the layer height set to 0.12 or 0.08 mm.

 

If you like the Cat, please consider to like or share.

 

Boost MeIf you like the cat or my other minecraft animals, please consider boosting me. Thanks