Planty - Modular plant growing support

Planty - Modular plant grow support

The Planty is great for letting your plants grow and support them as they need. 

The main advantage of this model is that you can easily extend the Planty when your plant grows bigger. 

Through its screwed feet it is very stable and does not shake or wiggle. The holes in the frame allow you to attach some wires or cord to attach the frame to your plant or align the growth.

Version 2 update increases stability significant and is compatible with the old version. Through the redesign the print time is extremely reduced.

Printing

• The print profile is optimized for BambuLab PETG HF. 
• Please beware, that you will only need 3 closing screws.

Assembly

1. Slide three feet into the frame

2. Push the frame with the three feet into the ground and level it
    

3. Screw three more feet into the holes above the other feet and slightly tight it

4. Place another frame above the three feet and slight them into its place

     

5. Continue this procedure to reach the desired height

6. To secure the last frame screw three closing screws into the holes above the feet. 

7. Now you have a stable plant support for your plants which can easily be extended by just unlocking the closing screws and adding another level on it.