ELRS TCXO EP1 DUAL MOUNT 19/25 MM

This TPU mount was originally designed for the Mr. Croc frame, but it is not exclusive to it — it can be used with many other FPV frames that match the hole spacing.

There are two versions:

• 19 mm hole spacing
• 25 mm hole spacing

Both versions include Ø 6.1 mm holes and a total height of 2 mm.

The model was created in Onshape and successfully printed on a Bambu Lab P1S.

👉 IMPORTANT: Please print using TPU!
Flexible material helps absorb vibrations and protects electronics.

Boost Me

🧰 Print Settings (Recommended)

• Layer height: 0.2 mm
• Material: TPU
• Speed: 50 mm/s
• Infill: 15–25% (Gyroid recommended)
• Walls: 3–4
• Supports: Not required
• Nozzle: 0.4 mm

🛠️ Notes

• Works for FPV frames with 19 mm or 25 mm mounting.
• Not limited to the Mr. Croc frame.
• Designed for durability, shock absorption, and vibration damping.