Yoda - hueforge

Hueforge of yoda with his lightsaber
The photos shows the result in 169x200mm and a nozzle of 0.4

Boost MeThanks for your boost!

You can change the X and Y dimensions but do not change the Z dimensions  
You must define the printing parameters indicated in the description below and change the filament on the indicated layers.  
You can use filaments other than those indicated, but the result will differ.  
You can use any black PLA

 

Hueforge description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm

The Model is 168.42x200mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 1.68mm

 

Filaments Used:
    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #7d6556 PLA BambuLab Matte Dark Brown  Transmission Distance: 2
    #304301 PLA BambuLab Matte Dark Green  Transmission Distance: 1
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
    #00ae42 PLA BambuLab Basic BambuLab Green  Transmission Distance: 2
This print uses 5 unique filaments

 

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #17 (0.84mm) swap to BambuLab Matte Dark Brown
    At layer #22 (1.04mm) swap to BambuLab Matte Dark Green
    At layer #23 (1.08mm) swap to BambuLab Basic Jade White
    At layer #36 (1.6mm) swap to BambuLab Basic BambuLab Green for the rest.

 

 

Star Wars is copyrighted by The Walt Disney Company