Designers OWL Sculpture

All my photos are REAL and show an actual 3D-printed figure photographed by me.
 

[ Suggested Print Setup ]
Nozzle: 0.4mm
Layer Height: 0.15mm
Infill: 5%
Wall loops: 2
Supports: Tree (auto)
Printed with: BambuLab PLA Matte Charcoal and painted Gold.

 

Printed with fuzzy skin effect. 

Fuzzy Skin: Contour
Fuzzy Skin Point Distance: 0.15
Fuzzy Skin thickness: 0.15

If you're interested in the commercial use of my models, or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you. Thank you!
 

As always!
The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.

 

Boost MeIf you enjoy my work, I’d be so grateful if you showed your support by clicking "Boost." Thank you! 😊