Passthrough Ball Fidget - Print In Place

This is an interlocking spherical puzzle made of three spiral segments that pass through one another to form a complete ball. Each piece follows a helical path around the sphere, resulting in a tightly interwoven geometry that must be assembled with careful orientation.

Important Note: This model contains large floating sections that require support until the spiral pieces connect in the upper layers. For best results, use a lower layer height, reduce print speed, or apply both for optimal quality.

Support has to be on build plate only.

Since all three pieces are symmetrical, you can freely mix colors between prints or filament types.

There is a brim at the base that can be trimmed off with a hobby knife after printing.

And yes; its compatible with the passthrough cube puzzle.

Enjoy!