Tado Valve Cover Cap

A cover cap for the standard Tado radiator valve unit. 

Print with the cap top on the print bed.

I would strongly recommend PETG for this although PLA would probably be OK unless you run your radiators very hot.

The cap should fit fairly smoothly in place over the dial, but remember to line the hole in the cap up with the sensor hole in the TADO unit.

To manually change the heat setting REMOVE the cap and turn the dial otherwise you will turn the hole away from the sensor.

If using the STL file on a Bambu:

To change the colour of the lettering goto the left panel, process > objects, right click on the Tado Cap Assembly, select split, to parts.

Then select the parts you want to change the filament for.

The 3MF file is already split into parts.