Rugged Box Mk1

Durable box with changeable inserts. So far there are only a few, but I will add more over time.

6x M5x35 screws are needed to connect the box with the lid and fix the latches. I used Imbusy. I recommend screwing the screw into separate parts first to pre-cut the thread and prevent the parts from possibly cracking. No need to use nuts.

The seal must be printed from FLEX (TPU)! If you do not have this material, do not print the seal!!!

I have several sizes of this box ready and I plan to upload them in the future. If anyone needs it immediately, write me.

Size: 200 x 120 x 50mm

Internal: 180 x 86 x 40mm