May 25, 2025
Description
Min. height 62 mm
Max height 112 mm
Bulid plate 1
Main item
0,16 mm layer height
Minimal support at the bottom
Build plate 2
Inner rod
0,12 mm layer height
If you need more adhesion turn on brims.
Boost MeBoost me if you like it! Thank you! ;)
An 8x2 mm magnet can be placed in the bottom.
On a flat surface, push the magnet in to make it nice and flat. Minimal superglue can go into the hole, but it's not necessarily necessary.
If you spray a little PTFE or similar lubricant inside the thread, the rod will rotate much better.
High-speed printing is not recommended due to fine details.
It probably won't work if resized.
Check out my other uploads and download and print them. ROG, Nvidia, Aorus, Intel, AMD, TUF, Sapphire, Inno 3d,. Sapphire, Ryzen,Minecraft and many more.
!!! Make sure the print speed and temperature and cooling are set correctly for your printer and the filament you are using. And the build plate should be clean. !!!
License:
Standard Digital File License
8
CsTibikeee
