e-Tow 2025 Bottom Mast Holder Plate

This is the bottom plate of the e-Tow 2025 to hold both masts for the motors.

It consists of holes for the 3 phase wires of each motor. I also added silicone around the plate for more adhesion. 

Needed hardware:

4x M6x90mm

4x 35mm washers

8x M6 Nuts (4 for each side for the mast fixation = 8)

Assembly:

• insert the 8 M6 nuts so that screws can get attached from top of the plate (I added them first reversed (with a hammer) so the holes get widened a bit) - then pulled them out and inserted them in the correct direction

Printed with a 0.6mm hardened steel nozzle.

My e-Tow 2025 Collection: https://makerworld.com/en/collections/6660539-e-tow-2025