Flexi bunny

I made an articulated multi-colored bunny. You can print it multicolored with or without AMS. To print the model in different colors without ams you will have to use glue. 
Model description:

STL Ass with tail is the back of the bunny with tail. You can print it in a different color from the main body part and glue it on. 
STL Body without ass and tail is the main part of the bunny's body without ass and tail. 
STL Body is the full body of the bunny. You can print it in one color if you don't want a multicolored model or print it in different colors using multicolor equipment like AMS or MMU etc. 
STL Ears are the back of the bunny's head and ears. You can print it in a different color from the head and glue it on. 
STL Eyes are the bunny's eyes. You can print it in two colors e.g. eyes in white and pupils in black, to do this print the whole model in white and the last two layers in black (the height of the layer should be 200 microns). After printing the eyes you will need to glue them on with glue. 
STL Head without eyes and nose is a bunny head without eyes and nose but with ears. You can choose this model if you want to print the head in one color and only the eyes and nose in another color. 
STL Head without eyes, nose and ears is a bunny head without eyes, nose and ears. You can choose this model if you want to print the bunny's ears in a different color than the head. You will have to glue the ears, eyes and nose to the head using glue. 
STL Head is a bunny head with ears, eyes and nose. You can choose this model if you want to print the whole head in one color or multicolor using multicolor equipment like AMS or MMU. 
STL Nose is just the nose of the bunny.

Models such as the nose or ears have a small area. I do not recommend using a textured plate, it is better to use a smooth plate for printing and if necessary use glue to securely adhere the model to the table surface. 

All models are printed without supports. 
If you print the nose, eyes and ears separately in a different color, you will have to use glue for assembly. 
To attach the head to the body you don't need to use glue, I have modeled a hinge joint for this purpose. 
Don't forget to share your prints.

If you have any problems write to me

Don't forget to subscribe to me

Assembly Instructions:

If you decide to print the models in different colors without using multi-color equipment, you will have to glue all the parts except the head to the body. 

Glue the ears, eyes, nose and back using super glue, plastic solvents or any other glue you use to glue the 3D printed parts together. 

The head should be attached to the body without glue, the head is connected with a hinge joint. 

Boost MeIf you like the model and want to support me you can boosted my model