Pikachu Bookmark or Portrait

Per requests I've updated the first four Pokemon, bookmarks(47x150mm, 42x150mm originally) and portraits(133x200mm, 169x200 originally) so they may look better as a collection. I also made the base a little thicker. The bookmark is on plate 1 and the portrait is on plate 2.

Pikachu
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
 

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size, this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with HueForge, just use a lighter to whisk them away.
 

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.4
    PLA BambuLab Basic Red Transmission Distance: 4
    PLA BambuLab Basic Yellow Transmission Distance: 6
    PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer (1.04mm) swap to Red
    At layer (1.28mm) swap to Yellow
    At layer (1.84mm) swap to Jade White for the rest.

Eevee Collection is Here

18 Total Prints

9 Portraits

9 Bookmarks

One each of Eevee and the 8 Evolutions: Espeon, Flareon, Glaceon, Jolteon, Leafeon, Sylveon, Vaporean, and Umbreon.

Together will form a poster.