MembershipGet a commercial license to sell physical prints of my 3D models! Join my membership today and start profiting from high-quality designs. Don’t miss out on this chance to turn my models into your business!
Introducing a brand new line of my Pokémon Deck Boxes, and what better way to start things off than the iconic Pikachu!!
Features:
- Compact Design
- This box is designed to be as small and compact as possible, while still holding the required amount of cards for a full deck of Pokémon card.
- 60+ Double Sleeved Cards
- This box is intended, and has been tested, for use with 60 double-sleeved cards. The exact sleeves I use are Dragon Shield's Sealable Inner Sleeves, inside Ultra Pro Penny Sleeves.
- Multiple Options
- While the original size is meant purely for Sleeved cards, I have also created an additional size for use with Top Loaders!
- Secure Lid with Functioning Button!
- The Button and box function just as you would expect and like an actual Poké Ball! Simply push the button in and tilt the lid open or closed.
- No Additional Parts Needed!
- It was crucial that this design required no parts other than what you can print. There is no need for glue, magnets, or anything else and this box can be assembled right off your print bed.
Assembly Overview: (video guide coming soon…)
How to Operate:
- Line up the notch on the back of the top assembly with the notch on the back of the Bottom piece
- This is best done at a 45 degree angle and can be thought of as a hinge mechanism that helps with opening and closing
- While pressing the inner Button, click the top assembly down into place
- Repeat the above steps in reverse to open
- Remembering the notched back acts as a hinge, press the inner Button and then rotate the top backwards to open, like a Poké Ball
If you'd like access to exclusive designs not available anywhere else, like the entire line of Gen. I Poké Balls:
Join me on Patreon!
designs.by.Marcum
