Ultimate Magnetic Cable Clips Holder

Ultimate Magnetic Cable Clips Holder

Introducing this cutting-edge 3D model – a sleek organizational solution for your cables!

Crafted with precision, the base features strategically placed holes for easy hanging or secure adhesive mounting.

The accompanying cover is designed with three removable magnets and three different clips, catering to various cable sizes, from USB to HDMI.

Experience the magic as your cables seamlessly thread through the clips, each equipped with its own magnet. Watch as they effortlessly snap into place on the base, creating a clutter-free and visually pleasing setup.

Say goodbye to cable chaos and embrace the future of organized simplicity!

Print

No support needed

We recommend a minimum resolution of 0.16mm

CLIPS SHOULD BE PRINTED IN TPU

For the Cover there are two version one with colored circles that requires AMS and one single color to be used with any printer.

BOM (Bill of Materials)

• 6 magnets of 12x2mm
• Double-sided adhesive or screws for mounting

Assembly

Take the cover and place it face down, insert 3 magnets of 12mm in diameter (max 4mm thickness), no need for glue!

Now take the base and insert the cover over it until everything is in position.

Finally, take the clips and slide a 12x2mm magnet into the designated slot. Again, no need for glue, and you can easily retrieve the magnets in the future.

Finally, use a bit of double-sided adhesive under the base to secure everything where you prefer. If you want (and before inserting the cover), there are 2 convenient screw holes to fix it wherever you want!

And that's it.

Update 22 Jan 2024

• Now available with 3 or 5 clips
• Added table mount

Update 08 Feb 2024

• Added 10mm magnets version