The Flash Running (4-Color Hueforge)

Please consider using your Boost token if this model/design helps you. And don't forget to smash the like button, so that others can see this model as well. Many blessings!
 

Remember if you want to scale, do it only with x and y axis.

z must be the same as original (or you will need to adjust color swapping layer heights).

 

The Flash wall art created with Hueforge. Image was intial created with MS Copilot. This can be placed on a printed shelf, printed frame or place directly on the wall.

 

Print at 100% infill (rectilinear) with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used and Layer Swap Order:

PLA Black - 0 (start with)
PLA Red - 4
PLA White - 12
PLA Yellow -17

** Feel free to change it up how you want with layer hieghts and swap order or colors.

 

Boost MePlease consider using your BOOST token if this model/design helps you. And don't forget to smash the like button, so that others can see this model as well. Many blessings!