Radius Control Guide for 4mm PTFE with CC Cover

A simple solution for feeding filament residing externally into a Centauri Carbon using one version or another of my internal spool kit that is already populated with a spool.

The cover snaps into the wire hole for the runout sensor in the right panel. This cover allows the PTFE to pass through the panel while securing it in place. The guide will likely need to be fastened as desired with an adhesive fastener such as the one in the BoM for this iteration. You will want at -least- 15 cm of 4 mm PTFE tubing on hand to use this. A compatible Bambu tube is also listed in the BoM.