Roman Laurel Wreath

Do you want a costume of Julius Caesar for a costume party? Or do you need to attend to an historical reenactament event from the Roman Empire? Or do you simple enjoy good quailty 3D printed wearables?
Congratilations, you have just found the best 3D printable Roman Laurel Wreath on the entire Internet.

This Laurel Crown is a single piece, based on a ergonomic designed to fit in any human head, and the leafs are based on real laurel leafs, carefully distributed around the head reasulting on an harmonious looking piece of art.
There are four sizes included on the file: S, M, L and XL, but probably S or M will adjust to most people (XL is really big). I also suggest you to adjust the scale to find your perfect fit.
Size S (or smaller) is the only size printable on a Bambu Lab A1 mini, for the rest you need a A1 / P1P / P1S / X1 / X1E / X1C / H2D due to print volume

You can complete your Julius Caesar cosplay with this SPQR roman golden scepter I designed: 

https://makerworld.com/es/models/2299652-spqr-imperial-roman-scepter#profileId-2509732

IMPORTANT 1: To avoid failures during printing, pleas do not change the parameters for manual tree supports on selected faces. Trust me, I learned it by the hard way after many failed prints until I found the perfect paramenters.

IMPORTANT 2: Please be very careful while removing the supports. There are a lot of them and this is a fragile 3D printed piece. I recommend using a small curved-tip plyers for removing the supports without damaging the Crown, and also a curved blade to remove the bits of burr of the first layer.

IMPORTANT 3: This is not the easiest and most pleasant 3D print, but it is totally worth it. Be patient and enjoy!