Trijicon RM82-HRS RMR Killflash | Airsoft

I've already had my optic shot out once before, and my current one has been shot but not broken. Making a killflash for this optic was a little challenging, as there had to be a way to be a tight fit and stay on.

After adjusting and re-adjusting the file multiple times, it fits on the optic snugly!

This will protect your sight from the possibility of being shot out. Once shot, I would recommend replacing it, it might be able to take a second shot if not broken but I would not advise trying that.

This ONLY fits RH82-HRS RMR as that's what it was based on. Other RMRs may not work!

It should print with an FDM printer; it is about a 20-minute print.

I made all mine in PLA and increased the infill to 20%. If you want it to be more durable, I suggest PETG or ABS, then you shouldn't have to replace it at all (in theory).